I've been looking for a 4x2x4 foot screen enclosure but the only ones I have found are the hybrid ones and I cant use a hybrid cuz I live in florida and i already have a hard enough time getting the humidity down in my full screen 2x2x4. anyone know where i can find one? or how to build my own?
trying to find a 4x2x4 screen enclosure
- Thread starter Eamon
- Start date
nightanole
Chameleon Enthusiast
Most just bond two 2x2x4 ones together if you just want a 4 ft wide 4ft tall one. Its pretty easy, just get 2 cages and 2 aluminum yard or meter sticks. Or if you can find 3/4 or 1" wide aluminum stock it would be even cheaper. Then just get some wee rust resistant nuts and bolts, drill some holes, and you are ready to go.
https://www.chameleonforums.com/thr...l-reptibreeze-xl-cage-with-drain-tray.189377/
https://www.chameleonforums.com/threads/2-x-reptibreeze-cages-into-1-large-enclosure.157963/
Personally if i was going big, i would make a 3-fft round cage and use 1/2" hardware mesh and a VERY large front door, unless you have 3ft long arms
https://reptilesmagazine.com/how-to-build-your-own-chameleon-lizard-cage/
These are soooo easy to make out of a piece of plywood and a jig saw or sawzall.
https://www.chameleonforums.com/thr...l-reptibreeze-xl-cage-with-drain-tray.189377/
https://www.chameleonforums.com/threads/2-x-reptibreeze-cages-into-1-large-enclosure.157963/
Personally if i was going big, i would make a 3-fft round cage and use 1/2" hardware mesh and a VERY large front door, unless you have 3ft long arms
https://reptilesmagazine.com/how-to-build-your-own-chameleon-lizard-cage/
These are soooo easy to make out of a piece of plywood and a jig saw or sawzall.
Last edited:
MissSkittles
Chameleon Enthusiast
I’ve just joined two XL screen enclosures together. I used what I could find without much fuss - thin wires and tiny hinges. If you go this route, find and use flat headed screws where the sides will be butted up against each other to avoid any gaps. If you can’t find any, you’ll have to sink the screws the best you can. To help keep them together, they sit on a 4’x2’ heavy duty shelving unit and the extended frame of the unit has kept it all together. If anyone were to look closely at my enclosures, they might at least giggle at how I patched it all together, but it works very well and so whatever.
Another challenge is addressing the drainage as no matter how well you have the two enclosures attached, there is always the issue of water possibly leaking where they join. I use the ReptiBreeze substrate trays with plastic tarp below and above to prevent leakage. My set ups are all bioactive though. I suppose silicone or Great Stuff foam could be used for that spot.
If I had planned things better and/or had more experience with building stuff, I could have had created perfect little castles, but again, it all works and that’s all that matters.
This will probably be a big help to you. https://chameleonacademy.com/double-wide-chameleon-cage-project/
Here’s a couple that I’ve done. Yes, they’re cheap ReptiBreezes that I bought on sale.
Another challenge is addressing the drainage as no matter how well you have the two enclosures attached, there is always the issue of water possibly leaking where they join. I use the ReptiBreeze substrate trays with plastic tarp below and above to prevent leakage. My set ups are all bioactive though. I suppose silicone or Great Stuff foam could be used for that spot.
If I had planned things better and/or had more experience with building stuff, I could have had created perfect little castles, but again, it all works and that’s all that matters.
This will probably be a big help to you. https://chameleonacademy.com/double-wide-chameleon-cage-project/
Here’s a couple that I’ve done. Yes, they’re cheap ReptiBreezes that I bought on sale.
