zachmcgaughey
New Member
Thank you for the help. Now my nozzles arn't spraying. I know water is circuating, because I can see it going through the zip drip.
Ugh... More Mist King Problems
- Thread starter zachmcgaughey
- Start date
LookinRound
New Member
What happens with each scenario? I'm guessing having the pump above the reservoir makes it harder to pump. Level and below should be fine, right?
Lathis
Chameleon Enthusiast
Stupid question, have you tried priming the pump again, just in case?
Have you taken apart the nozzle to make sure it's not clogged?
Have you tried taking out the zipdrip to see if if works then?
Unless your pump is more than a a couple feet away from the reservoir, it shouldn't matter whether it's above or below.
You might try the ideas above to see if they work. If you know water is getting to the zipdrip, my first test would be to remove it and run the system.
Have you taken apart the nozzle to make sure it's not clogged?
Have you tried taking out the zipdrip to see if if works then?
Unless your pump is more than a a couple feet away from the reservoir, it shouldn't matter whether it's above or below.
You might try the ideas above to see if they work. If you know water is getting to the zipdrip, my first test would be to remove it and run the system.
I'm sorry to hear that you are having problems with your Mistking system. I have several and most of my pumps are 15 to 20 feet from the reservoir. I missed the previous posts/thread on this but if you are still having problems feel free to pm me and I will be happy to help you figure it out. I've had more problems then you can imagine as my systems all feed out of a central reservoir and I have so many misters ( 16-20 ) on some of my 5 systems. I have found every time that the problems were always something I caused and not a problem with the system it self. It can be something as simple as a line not cut straight causing a pressure loss or a line just not pushed in enough etc. If you need help just let me know and I will give you my mobile # and we can go through your system together with me on the line. I'm quite sure we can figure it out,or at least determine what the problem is.
Steve
Steve
