Securing branches

[Hiller]

Hello, I was wondering how people secured their branches and dowel rods. I put a thumb tack in each end of the rods but they tend to spin. I need a solution. Thanks

 

[Masked Gecko]

Hot glue them but leave the thumb tack still on the branch/rod for extra support.

 

[nick barta]

Hello, I was wondering how people secured their branches and dowel rods. I put a thumb tack in each end of the rods but they tend to spin. I need a solution. Thanks

Dowel rods and bamboo are useable, but area too slick, requiring more grip. I would suggest real branches.

CHEERS!

Nick

 

[Turner1986]

i used a small drill bit and drilled a small hole through each end of the bamboo and use the wire from garbage ties, through the drilled holes and through the screen and twist. Nice, easy, clean, and free lol, and they dont move at all. Also if you using something slick like bamboo, just scuff it up with sandpaper before you put it in the cage.

 

[Blink]

I attached all my branches with this green florist/gardening wire I found a gardening center. It was inexpensive and it works great... Super secure as long as you attach it at the right angle.

 

[MelissaB]

My favorite way to secure branches in a screen cage is ActionJackson's method. Using plastic chains and cable clips. I used small self taping screws to hold the chain. It makes it easier to position branches without tearing the screen, and the chameleon can use the chain to climb on, too.

link:
https://www.chameleonforums.com/new-cage-setup-111202/

 

[Hiller]

Thanks a bunch all

 

[stolbert89]

I've found magnets to be great. Very cheap at lowes or Home Depot. Just glue one to the end of your branch or vine and place the other to the outside of the cage to secure it in place. Use a larger magnet for heavier items.