mistking/screen cage

[Zymurgy9]

I finally got a mist king!!
How would one go about mounting this on a screen cage? I don't want to have to put a hole in the screen (as I have found out crickets are crafty escape artists) but I see that it may be the only option. Anybody else out there with a mistking and screen cage set up?

 

[Solid Snake]

If you did not purchase the "screen top wedges". You can "make" one. I cut a piece of thin board into a strip. I then laid it across the top of the cage corner, marked it where I wanted it, and cut off the excess. I drilled a hole in the board, just big enough to fit the nozzle. I used machine screws to mount it to the top of the cage, in the corner. You will have to make a hole in the screen, but it should only be big enough for the nozzle to go through. Put the nozzle in, and tighten it down. Adjust it where you like, and hook it up to the pump.

 

[Davonat]

You will have to cut a hole in the screen....I sandwiched the screen between 2pieces of 1/4" thick wood