pantherchamlove36
Established Member
I got a feeder with a magnet from full throttle feeders. I have a dragon strand cage so it’s pvc siding not screen mesh. How can I put it in dragon strand cage?
Feeder cup issue
- Thread starter pantherchamlove36
- Start date
nightanole
Chameleon Enthusiast
Either glue a piece of metal to the inside of the cage and have the stock magnet stick inbetween the feeder and the metal. Or possibly use another neodymium magnet(old hard drive or something beefy) on the outside of the cage to beef up the magnet.
But in either case, you will be leaving the stock magnet connected to the feeder.
But in either case, you will be leaving the stock magnet connected to the feeder.
They have a plate magnet to use on DS hybrid style cages.. I had to get one for mine. The back of it sticks to pvc sheets https://www.fullthrottlefeeders.com/product-page/flat-surface-magnet-attachment
Just be sure about placement because you can not get it off once you stick it to the panel.
pantherchamlove36
Established Member
Okay thanks so much I appreciate
