Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Note that there are three settings for the timer: ON, OFF, and AUTO. AUTO is used when you have setup a program and adjusted times accordingly, OFF is OFF, should be self explanatory, and ON is a manual setting that turns the pump on and overrides the programming of AUTO settings. There should be an instruction manual on the timers use to assist if you have further questions. If not let me know and I would be able to walk you through setup. Good luck and as always post pics when you are done with the setup )
The Pump Is Cold But Needs a green and red light.. I Have a tube going in the --> arrow, For enclosure 1, and for enclosure 2--> in the arrow So I have 2 bins of water.
Just a quick heads up: If you ever need to disconnect a tube from one of the quick connect fittings, PUSH DOWN on the collar as you're pulling the tube out, or you'll break the fitting. They're kind of like the finger trap toys, you have to push down to get the lock to release, and at the same time pull the tube.
Also, during set up, push the tubes in until you feel them seat. Sometimes they'll feel like they're in, but they'll spray water. You have to make sure they're all the way in.